Clean the light and Lubricate the O-Ring
- For good practice, put the light into fresh water for few hours after every dive.
-
After each dive, always rinse with fresh water. If the diving light and the battery will not be used for a prolonged period of time (more than a month), remove the battery from the light.
-
In rare cases of flooding, discontinue use. Turn the light off immediately, disconnect the battery, and rinse with fresh water. Let the component dry completely, and return it to BigBlue for service.
-
Flooding damage cannot be repaired on site.
-
Dry it out and put the silicone crease on the O-Ring. Ready for other dive.