In The Box

Warm your core. Control your heat.

The EO Heated Package brings together the full Powered Heat Sync system: a heated vest that sits under your drysuit, a controller that lets you turn the heat up or down during the dive, and a clean, sealed way to bring power through your drysuit. Pick the pieces that fit your suit and your diving; we’ll package them at 20% off.

1. EO Heated Vest — Complete Set

Eight independent heating pads that attach with Velcro, so you can place heat on the front, back, or both, and use only the pads you need. The vest adds virtually no volume under a drysuit, and its locking cable connectors help prevent accidental disconnection during the dive.

  • Up to 72 W across eight pads (9 W per pad), 12 V
  • Burn time: about 4 hours on an EOS23 / EOD23 canister, 2.5 hours on an EOS12
  • Sizes: M (chest 36.5 cm, length 53.5 cm), L (chest 43 cm, length 58.5 cm), XL (chest 49.5 cm, length 63.5 cm)
  • Complete set includes the vest shell, eight heating pads and the heated vest cable

2. EO Heat Controller: I or Y

Fixed power output means what feels right at depth can be too hot on your deco stops. The EO Heat Controller, developed with Patrick Widmann, sits between your battery and your heated gear and gives you three output levels: 100% (red), 50% (yellow) and 25% (blue).

  • Controller I: inline, controls one device (your vest)
  • Controller Y: splits power to two devices with independent left/right control. Choose Y if you’re adding the gloves.

3. Getting power into your drysuit: Thermal Inflator Valve or DrySuit Connector

  • Thermal Inflator Valve I / II: replaces your standard inflator valve with one integrated assembly for both inflation and power. Rotates 360°. Valve I has one heated output, Valve II has two independently controlled outputs (with a blind plug for the unused port).
  • DrySuit Connector I / II: keep your existing inflator valve and add a dedicated power connection, in single or double cable configurations.
  • Both come in Apeks (38 mm) and SiTech (33 mm) fittings, male or female.

Optional: EO Heated Gloves

Heat across both the front and back of the hands, to keep dexterity when it matters. Use them with the Controller Y alongside your vest, each side adjustable on its own.

  • 48 W, 12 V. Burn time about 6 hours on an EOS23 / EOD23 canister, 4 hours on an EOS12
  • Sizes M–3XL (hand size 20–27 cm)

Optional: EO canister

Already diving an EOS or EOD canister? You’re set. If not, add one to the package. The same canister powers your EO light heads and your heated gear.

Why the package?

  • 20% off every part compared with buying them separately
  • Compatible by design: every option you can pick works with the rest of the system
  • One order, shipped together

Note: heating pads can get hot. Always use the heated vest and gloves with an EO Heat Controller.

Product Specifications